螺纹锁固系列 ND vibra-tite 111(ND222)低强度螺纹锁固胶瑞士SULZER MIXPAC、美国PPG SEMCO、美国TECHCON、美国vibra-tite、美国STICK1专业授权代理商-深圳市迈图商贸有限公司

产品详情

Vibra-TITE®螺纹锁固产品能防止螺栓松动，并且能够帮助螺栓抵抗震动和撞击。产品是液态，能够完全填充螺纹之间的间隙。能够永久地确保螺栓装配安全，并提供均匀的装配力矩避免摩擦腐蚀。

与传统的机械螺纹锁固相比，Vibra-tite®的优势：

.防止意外的移动，松脱，泄漏和腐蚀

.抗震动

.容易涂胶和清除

.可以应用在所有型号的紧固件上（降低成本）

Vibra-TITE®的厌氧胶是液态的胶黏剂。可以在常温下，在钢铁，铝，黄铜等大多数金属表面形成热固性塑料，在无氧的条件下固化，完全填满螺纹之间的空隙，锁固螺栓和链接件。

低强度：

可以使用标准手工工具拆卸，适用在调整螺栓，标准螺栓，仪表和量具，要求螺栓小于M8

Vibra-Tite Part #	Available Sizes	Competes with Loctite® #	Approx. Viscosity (cP)	Max Gap Fill (IN)	Torque Break / Prevail (in LB)	Temp Range °F	Fixture Time	Specific Gravity	Primer	Specs Met
111		222	Low Strength - Removable - Purple
11102	2 mL Bullet		900 - 1500 Thixotropic	0.007	75 / 25	-65 to 300	15-20min	1.05	N, T	MIL-S-46163A, ASTM D-5363, NSF Non-Food
11110	10 mL Bottle	21463
11150	50 mL Bottle	21464
11125	250 mL Bottle
11100	1 L Jug
11199	100 pc Fishbowl
121		242	Medium Strength - Removable - Blue
12102	2 mL Bullet		900 - 1500 Thixotropic	0.007	100 / 45	-65 to 300	10 - 20min	1.06	N, T	MIL-S-46163A, ASTM D-5363, NSF Non-Food
12110	10 mL Bottle	24221
12150	50 mL Bottle	24231
12125	250 mL Bottle	24241
12100	1 L Jug	24243
12199	100 pc Fishbowl
122		243	Oil Tolerant - Removable - Blue
12202	2 mL Bullet		1300 - 3000 Thixotropic	0.015	195 / 70	-65 to 300	20 - 30min	1.1	N, T
12210	10 mL Bottle	24077
12250	50 mL Bottle	24078
12225	250 mL Bottle	24079
12200	1 L Jug	21433
12299	100 pc Fishbowl
123		246	Medium Strength High Temp - Blue
12350	50 mL Bottle	29514	2600			-65 to 450	5min	1.15		ASTM D-5363
125			Medium Strength Gel - Removable - Blue
12508	8 mL Tube		Gel	0.015	120 / 45	-65 to 300	20 - 30min	1.1	N, T
12508BC	8 mL Tube
12535	35 mL Pump
131		262	Permanent Strength - Red
13102	2 mL Bullet		1300 - 2300 Thixotropic	0.007	200 / 250	-65 to 300	15 - 20min	1.1	N, T	MIL-S-46163A, ASTM D-5363, NSF Non-Food
13110	10 mL Bottle	26221
13150	50 mL Bottle	26231
13125	250 mL Bottle	26241
13100	1 L Jug	26243
13199	100 pc Fishbowl
132		263	High Strength Primerless - Red
13250	50 mL Bottle	1330585	400-600	0.007	275 / 290	-65 to 360	5min	1.1		ASTM D-5363
135			Permanent Strength Gel - Red
13508	8 mL Tube		Gel	0.015	200 / 100	-65 to 300	20 - 25min	1.1	N, T
13508BC	8 mL Tube
13535	35 mL Pump
13525	250 mL Tube
137		272	High Temp/High Strength - Red
13750	50 mL Bottle	27240	4000 - 12000	0.007	300 / 200	-65 to 400	20 - 30min	1.1	N, T
13725	250 mL Bottle	27270
13700	1 L Jug	27285
140		271	High Strength - Red
14002	2 mL Bullet		400-600	0.007	250 / 250	-65 to 300	10 - 15min	1.1	N, T	MIL-S-46163A, ASTM D-5363
14010	10 mL Bottle	27121
14050	50 mL Bottle	27131
14025	250 mL Bottle	27141
14000	1 L Jug	27143
14099	100 pc Fishbowl
146		277	Large Diameter/High Strength - Red
14602	2 mL Bullet		6000 - 8000	0.01	250 / 250	-65 to 300	30 - 40min	1.1	N, T	MIL-S-46163A, ASTM D-5363
14610	10 mL Bottle	21434
14650	50 mL Bottle	27731
14625	250 mL Bottle	27741
14600	1 L Jug	27743
150		290	Medium Strength - Wicking Grade - Green
15002	2 mL Bullet		20 - 55	0.004	85 / 200	-65 to 300	10 - 15min	1.1	N, T	MIL-S-46163A, ASTM D-5363, NSF Non-Food
15010	10 mL Bottle	29021
15050	50 mL Bottle	29031
15025	250 mL Bottle	29041
15000	1 L Jug	29043
325		425	Plastic Parts - Blue
32520	20 gm Bottle	42540	80	0.004	4 / 2	-65 to 180	2min	1.1